Structural silicone sealants after exposure to laboratory test for durability assessment

During the service life of structural sealant glazing (SSG) facades, the load-bearing capacity of the silicone bonds needs to be guaranteed. Laboratory tests can assess the durability of SSG-systems based on mechanical characteristics of the bond after simultaneous exposure to both climatic and mechanical loads. This article studies how the material characteristics of two common structural sealants are affected by laboratory and field exposure. Dynamic mechanical analysis (DMA) confirms a reduction in the dynamic modulus of exposed silicone samples. Results from thermogravimetric analysis, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and small-angle X-ray scattering/wide-angle X-ray scattering show differences between the two sealants and indicate no/minor changes in the composition and morphology of the laboratory and field exposed sealants. Mechanical characterization methods, such as DMA, and tensile and shear testing of the structural bond, are shown to be sensitive toward the combined climatic and mechanical loadings, and are hence suitable for studying degradation mechanisms of structural sealants.     

Spreading and Curing Behaviors of a Thermosetting Droplet-Silicone on a Heated Surface

Thermosetting materials are widely used as encapsulation in the electrical packaging to protect the core electronic components from external force, moisture, dust, and other factors. However, the spreading and curing behaviors of such kind of fluid on a heated surface have been rarely explored. In this study, we experimentally and numerically investigated the spreading and curing behaviors of the silicone(OE6550 A/B, which is widely used in the light-emitting diode packaging) droplet with diameter of ～2.2 mm on a heated surface with temperature ranging from 25 ℃ to 250 ℃. For the experiments, we established a setup with high-speed camera and heating unit to capture the fast spreading process of the silicone droplet on the heated surface. For the numerical simulation, we built a viscosity model of the silicone by using the Kiuna's model and combined the viscosity model with the Volume of Fluid(VOF) model by the User Defined Function(UDF) method. The results show that the surface temperature significantly affected the spreading behaviors of the silicone droplet since it determines the temperature and viscosity distribution inside the droplet. For surface temperature varied from 25 ℃ to 250 ℃, the final contact radius changed from ～2.95 mm to ～1.78 mm and the total spreading time changed from ～511 s to ～0.15 s. By further analyzing the viscosity evolution of the droplet, we found that the decreasing of the total spreading time was caused by the decrease of the viscosity under high surface temperature at initial spreading stage, while the reduction of the final contact radius was caused by the curing of the precursor film. This study supplies a strategy to tuning the spreading and curing behavior of silicone by imposing high surface temperature, which is of great importance to the electronic packaging.     

Enhancing the Yield Stress in Liquid Polydimethylsiloxane to Allow Its 3D Printing: Hydrogels as Removable Fillers

For manufacturing parts of very soft materials by liquid deposition modeling (e.g., to mimic living soft tissues), formulations of 3D-printable polydimethylsiloxane have been developed, with the aim of increasing the yield stress of the liquid and reducing the final mechanical modulus. In the present work, suspensions of solid-like hydrogel particles, which are easily 3D-printable, are prepared in order to generate yield stress, and the suspended phase is removed after manufacturing by taking advantage of the thermo-reversibility of the hydrogel behavior, resulting in porosity, which reduces the final rigidity. The reported approach is even more efficient than a previous approach based on emulsion formulations.     

基于有限元仿真的发泡硅橡胶老化规律研究

通过力学性能测试得到发泡硅橡胶应力应变曲线,结合Ogden(Foam) 3阶超弹本构模型,建立发泡硅橡胶静密封系统的有限元仿真模型,得到大压缩量下发泡硅橡胶的von Mises应力及接触压力分布情况。仿真结果表明:大压缩量下发泡硅橡胶对称中心线位置的von Mises应力、接触压力值较大,在橡胶边缘和靠近限位环处接触应力数值有突增。开展140℃热空气老化试验,测定老化后发泡硅橡胶应力应变曲线,结合有限元仿真模型分析发泡硅橡胶老化后von Mises应力、接触压力的变化规律。结果表明:经过热空气老化后,在一定载荷下发泡硅橡胶等效应力和接触压力均呈增大的趋势。     

含新型有机硅缓蚀剂的制备及性能研究

为了研究缓蚀剂组分及添加条件对发射药性的影响,设计并制备了一种含新型有机硅的缓蚀剂材料;采用烧蚀管法,对比石蜡+TiO2型缓蚀剂,研究了新型有机硅缓蚀剂的静态降烧蚀效果;采用密闭爆发器研究了不同缓蚀剂添加条件对高能硝胺发射药点火和燃烧性能的影响;采用14.5mm弹道枪和壁温测试装置,研究不同缓蚀剂添加条件对膛壁温度、内弹道性能和枪口烟雾的影响。结果表明,采用含新型有机硅的缓蚀剂,降烧蚀效果更为显著;随着缓蚀剂添加量的增加,压力峰值、弹丸初速也会产生小幅下降,但总体影响幅度较小;添加缓蚀剂后,射击过程膛壁峰值温度显著下降,下降幅度随着缓蚀剂添加量的增加而增加,在缓蚀剂质量分数为3%时,对身管壁温降低幅度可达17.1%,且产生的枪口烟雾量较少;在缓蚀剂质量分数为5%时,缓蚀剂添加过量,枪口产生较大烟雾。该缓蚀剂及添加条件有望应用于低烧蚀发射药配方中。     

仅外墙板为装配式建筑的施工细节

装配式建筑相较于传统建筑,具有节能减排、绿色环保、快速施工、工业化生产和缩短工期等优势,能有效改善我国现阶段建筑业劳动力低、技术创新弱、建筑品质不高的局面,推动建造方式的改变,并能大幅提高企业信息化、可视化管控管理水平,并通过预制装配式产业链的整合,催生相关新产业和服务业,可以使产业链上各企业的核心竞争力得到提高。全产业标准化,规格化,使得信息流、资金流和物流得到有效整合。     

Effect of Sodium Halide on Micellar and Surface Properties of Cationic Silicone Surfactants

The effect of sodium halide on aggregation behavior of four cationic silicone surfactants, Si₃mamCl, Si₄mamCl, Si₄PyCl, and Si₄minCl, in solution was investigated using surface tension and conductivity measurements. The ability of sodium halide (NaCl, NaBr, and NaI) to reduce critical micelle concentration (CMC) values was in the order NaI > NaBr > NaCl. However, the γ_CMC values of the cationic silicone surfactants, Si₄mamCl, Si₄PyCl and Si₄minCl, in sodium halide solution are almost the same as those of the salt-free system. The values of and are negative, indicating that the micellization process and adsorption of the four cationic silicone surfactants at the air-solution interface are spontaneous.     

二甲基二氯硅烷水解反应器研究进展

基于对甲基氯硅烷单体生产中水解反应特点的分析,论述了国内外几种水解反应器的结构特点,着重介绍了几种水解反应器在工业应用过程中存在的优缺点,并对水解反应器未来的发展方向进行了展望。     

Flame-retardant properties and synergistic effect of ammonium polyphosphate/aluminum hydroxide/mica/silicone rubber composites

The flammability behaviors of ammonium polyphosphate/aluminum hydroxide/mica/silicone rubber (APP/Al[OH]₃/mica/SiR) ceramifying composites containing APP, Al[OH]₃, and mica are investigated by cone calorimeter test. The thermal degradation and the synergistic effect of APP/Al(OH)₃/mica/SiR composites are investigated by thermal gravimetric analysis, X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. APP/Al(OH)₃/mica/SiR composites with 25 wt% of APP, 20 wt% of Al(OH)₃, 25 wt% of mica, and 30 wt% SiR presents a much lower total heat release, the value of peak heat release rate (PHRR), the maximum average heat release rate, the longest time to ignition, and time to the PHRR (t_PHRR), compared with the flame-retardant properties from composites with filler of APP and mica or APP and Al(OH)₃ alone. The results indicate that there is an excellent synergism in APP, Al(OH)₃, and mica, which endows APP/Al(OH)₃/mica/SiR composites with both good flame retardancy and fire prevention. The study on the synergism effect between fire prevention and flame retardancy of APP/Al(OH)₃/mica/SiR composites indicates that compounds containing P-O-Al are formed due to the reaction between APP and Al(OH)₃ during combustion in the early stage and a coherent, dense, and sealed structure is formed due to the reaction in mica, phosphates, and the thermal decomposition products of SiR during combustion in the later stage.     

影响硅橡胶涂层疏水性的因素

目的寻找影响硅橡胶涂层疏水性的因素,并找到相应的提升改进方法。方法以液体硅橡胶为基体,通过燃烧橡胶条熏附、添加纳米SiO2粉末混合和喷洒纳米SiO2粉末附着这三种不同方式,来制备超疏水表面涂层。通过改变纳米粉末的加入方式、加入质量,研究疏水性的最佳条件。并通过光学显微镜测量静态接触角评价表面疏水性能,寻找影响其疏水性的因素。结果最佳的方法为熏烧的烟尘附于液体硅橡胶涂层表面,大多数试验样本出现超疏水特性,静态接触角最高可达159°,平均值150°,静态接触角提高40°以上;次之为均匀喷洒纳米SiO2粉末,部分试验样本出现超疏水特性,静态接触角最高为145°,平均值135.5°,静态接触角提高30°~40°;简单搅拌混合的提升效果最差,没有试验样本出现超疏水特性,静态接触角最高可达124°,平均值108.5°,静态接触角只提高5°~15°。结论构建超疏水涂层的关键在于能否成功构建出微纳米的二级微观结构,简单的物理混合、搅拌会使纳米粉末被覆盖掉,无法表现出其特性。涂层的疏水能力与接触周围的实际微观长度有关。